总部:深圳市美德龙五金塑胶制品有限公司
办公地址:深圳市宝安区西乡街道宝源路深圳市名优工业产品展示采购中心B座1区四楼401号
分部:东莞市美昕龙五金塑胶制品有限公司
工厂地址:东莞市凤岗镇雁田村怡安工业城第56B座厂房
公司网址:www.medlon.net / www.medlonchina.com
JYPP系列插片式电源连接器
JYPP Series Power Module Connector
产品简介Product Introduction
JYP系列插片式电源连接器采用弹片式结构接触件,具有集成化、
体积小、承载电流大,插拔柔和、可盲插、可自身导向、动态接触、
可靠性高等特点。采用进口高导电性能铜合金材料 做导体,并在导
体的接触区域进行镀金处理。壳体采用耐高温塑胶,玻纤加强,UL94-V0,
黑色。产品接触件有信号、电源二种接触规格,电源接触件的中心距有
5.08mm、6.35mm、7.62mm三种,在保持连接器外形尺寸和节点芯数不变的情况下,可以任意选择电源和信号接触点数量以及之间的配合顺序。该系列产品可与FCI的PowerBlade Plus 系列、TYCO的Multi-Beam XLE系列产品互换。
JYPP Series power connector have spring contact, it is integration, small size, high power current conduction capability, contact smoothly, mate with guide position, high connect stabilization. The contact is high performance copper alloy, gold plated at mating area. Housing is high heat-resisting thermoplastic, glass filled, UL94-V0, Black. The contacts include power contact and signal contact, The distance of power contacts is 5.08mm,6.35mm,7.62mm, The quantity and sequence of the power and signal contacts could be ranged by the customer, at the same outer size of the connector. JYPP series power connector could interchange with FCI PowerBlade Plus series, TYCO Multi-Beam XLE series connector.
产品应用Product Application
JYPP系列产品应用在数据、电信、数据通信和网络等领域,主要用于板对板连接的印制电路板用电源、服务器、UPS、存储器、通信设备的电源接口上。
JYPP series connector application area is digital communication, internet network etc., It is used in the connection of PCB to PCB of Power module, server, UPS, storage, communication device.
环境性能Environment Performance
工作温度Working Temperature:-40℃~+125℃
相对湿度Relative Humidity:40℃时,95%
电性能参数 Electric Performance
接触件规格 Contact Specification |
接触电阻 Contact Resistance (mΩ) |
额定电流 Rated Current (A) |
额定电压 Voltage Rating (AC/DC) |
耐电压 Withstand Voltage |
绝缘电阻 lnsulation Resistance |
|
|
||||
信号接触件 (2.54mm中心距) Signal contact (2.54mm Pitch) |
单PIN 3A 3A Single Contact |
88/124V |
1000V |
≥1000MΩ |
|
25个以下3A Below 25 PINs |
|||||
25-48个1A PIN No. between 25-48 |
|||||
电源接触件 (5.08mm中心距) Power contact (5.08mmPitch) |
≤10-20mΩ |
75A Max. |
295/417V |
2500V |
≥1000MΩ |
电源接触件 (6.35mm中心距) Power contact (6.35mmPitch) |
466/659V |
||||
电源接触件 (7.62mm中心距) Power contact (7.62mmPitch) |
645/912V |
机械性能 Mechanical Performance
插合/分离力 Mating/Unmating Force – 公母连接器插合/分离力 The force to mate/unmate a receptacle and compatible plug
插合/分离力 Mating/unmating force
|
每个电力端子 Per power Contact |
每个信号端子 Per Signal contacts |
备注 Notes |
最大插合力 Mating force (Max.) |
5N |
1N |
|
最小分离力 Unmating force (Min.) |
2.2N |
0.2N |
|
以下细节需符合 The following detail shall apply:
1, 插合速度 Cross head speed – 12.7mm 每分种;
2,产品插合分离不可加润剂 Lubrication – None
3, 参考EIA标准 EIA-364-13 (Reference EIA-364-13)
机械寿命Durability: 500次
1, 最大插合速度每小时500次 (Maximum cycling rate:500 cycles per hour)
2, 测试参考EIA标准 EIA-364-09 (Test reference EIA-364-09)
产品料号系统
Copyright © 深圳市美德龙五金塑胶制品有限公司 版权所有 粤ICP备17052038号